ABJ-N Power Protection Module For Compressors (With NTC)
- Shanghai Chaoshi Electronic & Electrical Equipment Co., Ltd.
- product brand:Shanghai Chaoshi Electronic & Electrical Equipment Co., Ltd.
- Numéro de stand：E2G36
- product specification:82(L)x78 (W)x 35.5(H)mm
- product category:Refrigeration Equipment-Components for refrigerating systems and plants-Miscellaneous components for refrigerating systems and plants
- product introduction:Mode ABJ-N Power Protection Module for Compressors is one of the power protecton modules independently researched and developed by our company. It can serve as a substitute for the mainstream NTC power protection modules (such as INT79) in the current market. The product has high reliability, high accuracy, high cost performance, and clear fault display. Input voltage on the three-phase protection end covers rated voltage in various countries across the world, while input voltage on the working power supply end covers single-phase voltage and DC voltage in various countries across the world. In other words, you can use this one single product under different electric supplies in various countries around the globe. This product is mainly used for the management of motors in screw compressors, exhaust systems, and fuel systems. It can also be used for the protection of other kinds of equipment with three-phase voltage.
Functions:
· On the three-phase protection end: Phase dislocation protection, dynamic & static phase loss protection, voltage unbalance protection
· On the temperature protection end: Two sets of NTC temperature protection, monitoring the compressor temperature and the discharge temperature respectively
· Switching value protection: Oil flow, oil level, and oil filter
Technical Parameters:
· Rated voltage levels: Three-phase 100~660VAC, 50/60HZ; smaller than 600HZ
· Working voltage: 24VDC; 48~275VAC/VDC
· Working environment temperature: -30℃~75℃
· Voltage unbalance rate setting: <8% (Max. voltage difference divided by Avg. voltage)
· Contact forms: 1A, 1C
· Rated power of relay contacts: 1A: 250VAC/7A; 1C: 250VAC/30VDC, 5A
· Delay output: 3s+20% (or upon agreement)
· Delay recovery time: 3min+20% (or upon agreement)
· Accuracy: 2% (based on resistance setting)
· Current on the NTC end: Not greater than 0.2mA
· Lowest temperature of NTC: -30℃
Dimensions:
82 (L)x78 (W)x 35.5 (H)mm
