NH3/CO2 Secondary refrigeration assembling unit
  • product brand:AOWID
  • Numéro de stand:E1D15
  • product specification:Refrigerant:NH3 Secondary refrigerant:CO2 Rated compressor displacement:high stage 144.5m3/h,low stage 338m3/h. Frequency conversion:25Hz~60Hz; Rated working condition:-35/+35℃; Rated cooling capacity:93kW; Rated motor power:75kW.
  • product category:Refrigeration Equipment-Refrigeration systems and plants-Miscellaneous refrigeration machines
  • product introduction:Application: It is mainly used in low temperature cold storage below 10000T and IQF below 1T/h cooling source Features: The high temperature side is NH3, and the three-stage throttling refrigeration system with double flash tanks is adopted, which is energy-saving and efficient; The low temperature side is CO2, which ensures that there is no oil in the evaporator and there is no performance degradation; It is applied to evaporative condenser system, and lower than water cooling condensation temperature and energy saving; The NH3 compound two-stage semi-hermetic screw compressor with permanent magnet variable frequency motor is energy-saving and efficient; Motor cooled by siphon refrigerant has a good cooling effect without scaling, which is more energy-saving and safe than spray cooling; The plate-shell oil cooler is also cooled by siphon refrigerant liquid, with small volume Vertical centrifugal oil separator with high molecular sieve structure is adopted, with oil separation efficiency of 3ppm; The horizontal siphon tank with the functions of liquid reservoir and washing oil separation is adopted to make the ammonia liquid entering the plate-shell condensing evaporator free of lubricating oil, so as to ensure that the heat exchange efficiency of the plate-shell heat exchanger will not be attenuated by lubricating oil, and there is no need to lay complex oil return pipeline, which is energy-saving and efficient; Full liquid plate and shell condenser evaporator reduces the equipment height and can be transported as a whole; The CO2 pump is one for use and one for standby to ensure the safe operation of the system; The amount of ammonia in the system is small; ?Complete safety protection with fully automatic operation.